Displays inline power configuration information for the specified ports.
| port_list | Specifies one or more ports. |
N/A.
Enabled: The port can provide inline power.
Disabled: The port cannot provide inline power.
Operator Limit—Displays the configured limit, in milliwatts, for inline power on the port.
Label—Displays a text string, if any, associated with the port.
The following command displays inline power configuration information for ports 1 to 10 on a switch:
show inline-power configuration port 1-10
Following is sample output from this command:
Port Config Operator Limit Priority Label 1 Enabled 15000 mW Low 2 Enabled 15000 mW Low 3 Enabled 15000 mW Low 4 Enabled 15000 mW Low 5 Enabled 15000 mW Low 6 Enabled 15000 mW Low 7 Enabled 15000 mW Low 8 Enabled 15000 mW Low 9 Enabled 15000 mW Low 10 Enabled 15000 mW Low
This command was first available in ExtremeXOS 11.1
This command is available on the PoE (Power over Ethernet) devices listed in Extreme Networks PoE Devices.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB